Quantum-composers 9530 Series Instrukcja Użytkownika Pobierz pdf (Strona 41)

9530/8530 Manual Version 4.8 Page 41

Keyword:

Command:

Sub-

Command:

Parameter Range:

Notes:

:PULSe[1/2/n]

Command to change the units’ channel

specific settings.

:CGATe

DIS / PULS / OUTP

Sets the channel gate mode to Disabled,

Pulse Inhibit mode, or Output Inhibit mode.

*Note: The system global gate mode must be

set to CHAN for this command.

:CLOGic

LOW / HIGH

Set the channel gate to active LOW or active

HIGH.

*Note: The system global gate mode must be

set to CHAN for this command to work.

Keyword:

Command:

Sub-

Command:

Sub-

Command:

Parameter Range:

Notes:

:SYSTem

Command to change the units’

system settings.

:STATe

?

Query Only Command

:BEEPer

Command to change the units’

beeper settings.

:STATe

0/1 or OFF/ON

Command to turn on or off the

systems' beeper.

:VOLume

0 - 100

Command to change the units'

beeper volume.

:COMMunicate

Command to set the

communication settings.

:SERial

Sub-Command to set the serial

interface parameters.

:BAUD

4800 / 9600 / 19200 /

38400 / 57600 /

115200

Command to change the baud

rate for the RS-232 interface.

:USB

4800 / 9600 / 19200 /

38400 / 57600 /

115200

Command to change the baud

rate for the USB interface.

:ECHo

0/1 or OFF/ON

Command to Enable/Disable

the echo function on the RS-

232 interface. The Echo

function will cause the unit to

repeat the command received

to the PC.

:KLOCk

0/1 or OFF/ON

Command to lock-out the

keypad.

:AUTorun

0/1 or OFF/ON

When the unit is powered up, if

this command is enabled, the

unit will start pulsing

automatically.

:VERSion

?

Query only. Returns SCPI

version number in the form

YYYY.V for ex. 1999.0

:SERNumber

?

Query only. Returns the serial

number of the unit. The format

returned will be “SER# xxxxx”.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 70 71

Komentarze do niniejszej Instrukcji

Brak uwag